Connect Your PS4 & Xbox Controller Credits to Hipton. Hello guys, since this isn't on the forums yet, I'm going to post it here Lets Get Started ~ What do i need? You need a Ps3 or xbox driver without this you wouldn't be able to play with a controller. Once this driver is installed on your computer it should work Driver Information - This works on any type of computer Note: Before we start this, I'm not responsible if your driver gets messed up! This shouldn't happen, so follow the steps correctly please for your own benefit! Lets Get Started ~ - Ps3 Controller Guide - (Scroll down to see Xbox controller guide) Setting Up Your Ps3 Controller: Before starting this, please make sure your ps3 cord is unplugged, so that this will avoid your from ps3 turning on Okay. Lets officially start this now Lol ~ Step 1: Download the driver here: http://www.motioninjoy.com/download - find something that says 32bit and 64bit all in one: site 1 Version 0.7.0000(testing)" Press on "site 1" Step 2: Run it or save it to your c drive or desktop.. It doesn't matter Step 3: After it's done installing it should close. Step 4: Now Download: http://ds3-tool.en.softonic.com/ Step 5: Install it and now open it Step 6: Before you open it make sure you connected your ps3 controller to your pc using a usb cord. Step 7: Now once its opened, go to "Device Manager' Step 8: Check your port and press install all.. Wait for it to finish. Step 9: Now Load driver.. It should say "Process success or something" Step 10: After that, look at your controller and it should be blinking lights in a pattern. DONT GET SCARED! This is supposed to happen! Step 11: Now on DS3 Tool, go to profiles and then go to custom=>Create Step 12: A window should pop up.. Don't worry, Once again. Step 13: Now this is where it gets complicated for some people.. Device: Is keyboard, Object: is whatever key you're changing Ex: Lets say if i wanted square changed to punch, which is "x" It would be "Device:Keyboard, Object: "x" Since that is punch on the key board.. Get it? Note: I wouldn't use the analog stick for moving because it's very unstable. Also just use the d-pad instead its more better Step 14: Click on "options" to the right and change the name of your config, that way its saved and you don't have to change anything. Step 15: You're ready to go now! If rumble fighter is launched, restart rumble fighter and it should work! There Ya Go ! - Xbox Controller Guide - (Wish Ps3 controller was this easy) Step 1: Press start and search for "regedit" Step 2. Extend (click the + sign) HKEY_CURRENT_USER Step 3. Extend Software Step 4. Extend Nimonix Step 5. Open Rumble Fighter Step 6. So there should be an entry at the bottom called MappedJoystick of REG_Binary type. Step 7. Double click it, and change the values in to the corresponding button(First Value = Button1). The values of the actions are as follows: 00 or 20 = Guard 01 = Punch 02 = Kick 03 = Jump 04 = Exocore Transform 1 05 = Exocore Transform 2 06 = Skill 1 07 = Skill 2 Step 8: After you change your desired settings close everything and restart rumble fighter There Ya Go! I hope this helped you! If you find out a way to use the analog stick for the ps3 controller please tell me Thanks Cya Later!
Yeah it's a lot easier. I tried playing with an Xbox controller. Not only is dashing clunky, it's hard to juggle and do angular tasks with it.
Im sure this may still be a good enough guide for people who may have broken their keyboards or in some similar situation
Is their anyway to set a button as a grab instead of pressing 2 buttons at the same time on the Controller? ☑️
I have to get used to using the Xbox 360 controller because when I used it, I forget to block often lol.
Can u post a picture showing how its supposed to look when you go in the mapped joystick and the order because My panic attack wont work for my xbox 360 wired controller
I might be a bit late to the party, but can anyone show a picture of how to configure the Xbox controllers? Like where, and what values should I assign in the regedit file, I don't really seem to understand where I should put "Button1" or whatever I'm supposed to do xD
Hi how do you set up a xbox controller through the registry can you show me what it is suppose to look like because I am utterly confused when I get to the values
if you install just the drivers and your pc detects the controller when you plug it in, rf already have a set of mapped buttons, but theyre kinda wonky.
You see I have tried that and nothing has happend so can you do like I asked show me how its suppose to look like because the drivers are all updated and controller mapping programs dont work.